Underwater Waterproof Housing Diving Case for Sony RX100 Camera 67mm Red Filter

Description

Underwater Waterproof Housing Diving Case for Sony RX100 Mark I Camera  Red Filter
Description
Features:
1. whether rain or snow, you can have unrestricted use of your camera
2. good tightness, high mechanical strength, to protect your camera
3. dustproof, anti-staining fingerprint, easy cleaning
4. Maximum water resistant 40 meters
5. Transparent hard plastic material and waterproof, dustproof
6.Clear view the camera information and control function.
7."O" ring sealed with spring-loaded.
8.1/4"tripod screw on the bottom
9.Material:Polycarbonate, Abs plastic, clear plate glass, Stainless steel, EPDM rubber
10.With this special design case, every key of inside can be pressed to control freely as you want.
11.Before close the case, please coat around the joint with the lubricant grease to get the good sealing effect.
12.Temperature —10~40°C
13.Fit For Sony RX100 Mark I camera
Attention before use:
1.Check whether good of performance first. Also check whether have sand and dust inside of case.
2.Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
Please do the test without camera.
3.Make sure there have no water inside. Then put your camera into waterproof case.
Precautionary Measure
1. use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C water may not use, because it will damage waterproof shell.
2. Need longer cle
aning time if ever used waterproof case. Should put into water for several hours.
3. Please sure whole case into water, include Safety lock devic.
4. In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water.
5. vestigital seawater will lead to corrosion metal parts equipment, it will affect button, two hinges and safety lock device
6. Use soft and clean fabric to clean equipment inside.
Attention before use:
1.Check whether good of performance first. Also check whether have sand and dust inside of case.
2.Must close the waterproof case and put it into underwater at least 200mm deep with 5 Minutes on condition of disassemble but waterproof oil with camera.
3.Make sure there have no water inside. Then put your camera into waterproof case.
Precautionary Measure
1. use a large number of fresh water (running water or drinking water) to thoroughly clean the outside of the waterproof shell. Higher than 40 ° C water may not use, because it will damage waterproof shell.
2. Need longer cle
aning time if ever used waterproof case. Should put into water for several hours.
3. Please sure whole case into water, include Safety lock devic.
4. In order to Avoid Scratch equipment by sand and dirt, pls choose soft fabric or thin tissue paper to Gently dry water.
5. vestigital seawater will lead to corrosion metal parts equipment, it will affect button, two hinges and safety lock device
6. Use soft and clean fabric to clean equipment inside.
Package included:
1 X Waterproof case for Sony RX100 Mark I camera
1 x Neck Strip
1 x Wrist Rope
1 x O-ring Gasket
1 x Cleaning Fluid
1 x Use Manual
1 x Red Filter 67mm
Shipping detail
Correct Address
We ship only to Paypal Address. If you want us to ship to other address, please write it down in Order Note of paypal when you pay! Address variation request via email will not be accepted.
Delivery Time
We will ship your order within 3 days upon Receiving Cleared Payment except Sunday and Public Holidays.
The delivery time to United States is around 15-20 days. Most international countries delivery time will be around 30-35 days. Some countries may take 40-60 days.
For Speed Post service, please contact us for quotation before you paid.
Local Tariff & Taxes
If your country charge for any import tariff or taxes, it is your responsibility as a citizen to pay for it. We will not be liable if your country custom department detains your parcel.